Rear disc brake caliper passenger side for TOYOTA COROLLA/ MATRIX PONTIAC VIBE

Short Description:

There are many replacement parts that you’ll need to get for your vehicles over the years, and brake calipers are certainly one of them. Without brake caliper, then, no vehicle would be able to stop. KTG AUTO focus on manufacturing brake parts for aftermarket. All KTG Aftermarket Brake Caliper continue the performance and specification of original OE part.

Feature

100% pressure tested to ensure consistent, reliable performance
High-standard heat treatment to improve the performance of the caliper body.
New bleeder screws ensure faster, trouble-free bleeding process
SAE-certified rubber seals and new copper washers guarantee exceptional seal
Comes with necessary mounting hardware for easy installation
Plastic cap plug in brake port line ensures optimum thread protection before installation

Send email to us

Product Detail

Product Tags

Requirement depend on application

Aluminum calipers with minimal corrosion or aesthetic requirements are not usually surface-treated after casting and machining

Non-treated surfaces or Painted surfaces or Anodized surfaces
Mounting with bracket or without bracket
Steel piston or phenolic piston

Know More About Aluminum Caliper

Disc brake calipers for the automotive industry have traditionally been made from ductile iron, but currently, more and more calipers are being converted to aluminum. Aluminum is light, strong, and can handle the heat produced by braking process. It is the most popular material for making brake calipers. With weight savings of nearly 40 percent, it can improve fuel consumption and the vehicle’s overall performance.

The same as the bracket of Iron brake caliper, the bracket of aluminum caliper also uses casting iron. With higher strength and plastics, it improves tensile strength and safety, and prevents the bracket from breaking during high-speed sudden braking.

Product Details

Location: Rear Passenger Side Drive side

Reference part number: 19B3796 19B3797

Material: Aluminum

Caliper Piston Count: 1-Piston

Piston material: steel

Quantity Sold: Sold individually

Series: Reman Series

Type: Caliper & Hardware

Notes: M10 x 1 Bleeder Port Size; M10 x 1 Inlet Port Size; 1.5 in. OD Piston Size;

Compatible Models

Vehicle Name	Submodel	Engine	Fitment Information
2009-2010 Pontiac Vibe	Base	4 Cyl 1.8L	Supplied With Mounting Bracket
2009-2011 Toyota Corolla	XRS	All Engines	Supplied With Mounting Bracket
2009-2013 Toyota Matrix	Base	4 Cyl 1.8L	Supplied With Mounting Bracket
2014 Toyota Matrix	All Submodels	All Engines	Supplied With Mounting Bracket
2014-2016 Toyota Corolla	S	All Engines	Supplied With Mounting Bracket
2017 Toyota Corolla	50th Anniversary Special Edition	All Engines	Supplied With Mounting Bracket
2017-2018 Toyota Corolla	SE	All Engines	Supplied With Mounting Bracket
2017-2018 Toyota Corolla	XSE	All Engines	Supplied With Mounting Bracket
2019 Toyota Corolla	SE	4 Cyl 1.8L	With Metal Piston, Supplied With Mounting Bracket
2019 Toyota Corolla	XSE	4 Cyl 1.8L	With Metal Piston, Supplied With Mounting Bracket

Full Range Brake caliper lines

KTG AUTO has more than 3,000 OE numbers for aftermarket brake caliper and brake caliper parts.

For any specific inquiry on brake caliper or catalog, please contact sales@ktg-auto.com with detail.

AMERICAN MOTOR	BROCKWAY	BUICK	CADILLAC	CHECKER	CHEVROLET
CHRYSLER	DESOTO	DIAMOND T	DIVCO	DODGE	EAGLE
FEDERAL TRUCK	FORD	FREIGHTLINER	GMC	HUDSON	HUMMER
INTERNATIONAL	JEEP	KAISER	LINCOLN	MERCURY	OLDSMOBILE
PLYMOUTH	PONTIAC	RCO TRUCK	SATURN	STUDEBAKER	WHITE TRUCK

ALFA ROMEO	AUDI	BMW	CITROEN	FIAT	JAGUAR
LADA	LANCIA	LAND ROVER	LDV	MERCEDES-BENZ	MINI
OPEL	PEUGEOT	PORSCHE	RELIANT	RENAULT	ROVER
SAAB	SCAT	SKODA	SMART	TALBOT	VAUXHALL
VOLKSWAGEN	VOLVO	YUGO